JMD-03 Human Body Infrared Sensor LED Night Light Wall Clock for Bathroom,Spec: Charging Model

1. Using human body sensing and light sensing technology, the night light is on standby during the day, and the night light is automatically turned on when people pass by at night, and the light is automatically turned off 25s after the person leaves
2. The time dot matrix composed of 108 LEDs displays the current time immediately when people pass by at night. Built-in independent clock power management chip, the clock can still work stably when the power of the product is low, without frequent setting.
3. Gravity-sensing rotary dimming: Built-in dual force-sensing switch-on, 4-level light adjustment can be achieved by rotating the sensor light, and there is always a brightness that suits you. At the same time, the time display follows the rotation, and it is always placed in a horizontal position, which is fun and interesting.
4. Two sets of yellow light/white light are preset, which can be switched by the button on the back. Among them, the yellow light is 2800K, which is suitable for lighting at night to create an atmosphere; the white light is 4500K, which is suitable for temporary reading, handheld lighting, etc.
5. There is a built-in magnet at the rear, which can be adsorbed on the wall or directly on the refrigerator or iron frame through the supplied magnetic attraction sheet, which is simple and convenient. Light-emitting design on four sides, the light is soft and does not dazzle the eyes.

Parameter:
1. Rechargeable battery capacity: 600mah
2. Dry battery model: 3 AAA batteries (batteries not included)
3. Standby time: about 1200 hours
4. Product principle: human body infrared sensor + light sensor
5. Rated power: 0.3W
6. Main material: ABS
7. Applicable area: about 5-15 cubic meters of space
8. Number of lamp beads: 4 led x 2
9. Charging interface: Micro usb
10. Charging voltage: DC 5V
11. Charging indicator: red (charging) / off (full charge)
12. Weight: rechargeable model --- net weight 70 grams, dry battery model --- net weight 55 grams
13. Product size: 87.8 x 87.8 x 27mm

Note: The product has a built-in four-dimensional gravity switch, and there will be a "tick" sound when shaken, which is not a quality problem, please pay attention!

Accessories: instruction manual, data cable (rechargeable only), environmental paper box.